点击图片查看原图
[第9年] 指数:9
通过认证 
简介Introduction
气流粉碎机是为超细研磨而设计的，可粉碎至5-20um的颗粒，适用于各种脆性、结晶体、热敏性、中低硬度物料的干法超细粉碎。
物料通过加料器均匀送料，物料通过进料口端射入的气体产生负压被吸入，进入研磨腔。然后物料沿设定方向在腔体内高速旋转，使得物料之间相互撞击、摩擦，将物料磨碎。绝大部分被粉碎后的超细物料进入储料容器中。极少数部分物料被带至除尘器中，经过滤后，洁净空气排出。
Jet mill is designed for ultrafine grinding, can be crushed to 5-20 um particles, suitable for all kinds of brittleness, crystals, heat-sensitive, low and medium hardness materials dry ultrafine crushing.
Material through the feeder evenly feeding, material into gas to produce negative pressure through the inlet end is sucked, into the grinding chamber. Then material along the direction set in the cavity at high speed, make the mutual collision and friction between the material and the material grinding. The vast majority of shattered after the superfine material into storage containers. Very few part of the material being taken to filter, after filtering, the clean air out.![9TUJ]XBM)TF34$8IF$[J]O2](http://www.yaoshang68.com/skin/default/image/lazy.gif)
特点Features
1.所有与物料接触的关键性金属表面应当由SS304不锈钢材料构成；
2.每个部件可拆卸，无死角，便于清洗、消毒；
3.内外表面抛光处理；
4.粉碎时无粉尘外溢。
1. all contact with the material of critical metal surfaces shall be composed of SS304 stainless steel materials;
2.each part removable, no dead Angle, easy cleaning and disinfection;
3. both inside and outside surface polishing treatment;
4. crushing, no dust overflow.
